Showing posts with label work at height. Show all posts
Showing posts with label work at height. Show all posts

Friday, November 6, 2020

Workers stranded 20 storeys high on gondola rescued

This incident was reported on Asiaone. 2 workers were stranded in the Gondola they were working in as the gondola broke down, and was tilting on one side. SCDF officers arrived and rescued them.

Important point to note: the workers were putting on their safety harness and had their safety helmets on. The safety harness probably saved them from potential fall from height accident.

Also, they did not try to climb through the window on their own, but instead waited for rescue.

For more details of the accident,  refer to the news articles, on Asiaone


Tuesday, April 16, 2013

WSH (Work at Heights) Regulations 2013 & WSH (Construction) (Amendment) Regulations 2013

The Workplace Safety and Health (Work at Heights) Regulations 2013 (WAH Regulations) have been gazetted and published on 15 April 2013. It will come into operation on 1 May 2013.

About the new Regulations

The key provisions in the new Regulations are:
(a) Fall Prevention Plan (FPP) – A specific provision mandates the establishment and implementation of a FPP in accordance with any Approved Code of Practice issued by the WSH Council. This provision will only be effective on 1 May 2014 to allow industry time to build up their capability;
(b) Permit-to-work System (PTW) – A specific part pertaining to the control of work at height where a person could fall from a height of more than 3 metres. This will also be effective on 1 May 2014 to allow industry time to have people trained and qualified to implement the PTW system;
(c) Training of workers, supervisors and other WAH personnel – Training requirements for work at height personnel are emphasised to ensure effective conduct and oversight of work performed at heights;
(d) Work on Roof and Fragile surface – Specific provisions on safe working on roof as well as working near fragile surface are included to require persons working there to be more vigilant; and
(e) Industrial Rope Access System – Due to its high-risk nature, a specific part has been included to address this area of concern.

The scope of coverage of the proposed Regulations will be in two phases, as follow:
1 May 2013
- Comes into force and applicable only to factories.
1 May 2014
- Coverage will be expanded to all workplaces
- Establishment and implementation of a FPP for workplaces specified in the Schedule
- Implementation of a PTW system for work at height where a person could fall from a height of more than 3 metres.

The WSH (Construction) Regulations have also been amended to delete those replica provisions in the new WSH (Work at Heights) Regulations via the WSH (Construction) (Amendment) Regulations 2013.

Leveraging on available assistance and resources
To help industry get ready for the Regulations, the WSH Council has rolled out various capability building initiatives during the recent Programme-based Enagagement (ProBE) Forum on 4 April 2013. These include:
  • Revised Approved Code of Practice on Working Safely at Heights (LINK) - Includes new chapter on the PTW for WAH, sample templates on FPP and decision flow chart for PTW.
  • Roll out of the enhanced Construction Safety Orientation Course in 1 May 2013 (LINK) - Includes new practical assessment on areas such as WAH.
  • Enhancements to WAH training
    - Workers will be trained in basic WAH knowledge (such as the correct use of a personal fall arrest system) while supervisors will be trained on how to check that all fall preventive measures are in place before work commences.
    - Two new levels (WAH course for Assessor and Managers) will also be offered.
  • A new WAH Train-the-trainer course has been developed to keep trainers up-to-mark on WAH fundamentals and ensure quality of training.

Thursday, April 19, 2012

New initiatives to address Falls from Heights fatalities

The Ministry of Manpower and the Workplace Safety and Health Council’s National Work at Heights (WAH) Taskforce have rolled out new initiatives to address falls from heights (FFH) fatalities. Efforts will be focused on four key areas of WAH - roof works, ladder use, structures, and scaffolds or mobile elevated work platforms (MEWPs). Industries performing such work will be actively engaged and educated on the safety of such work under the Programme-based Engagement (ProBE) Plus initiative this year.
2 Falls from Heights (FFH) remain the highest contributor of workplace fatalities, claiming the lives of 17 workers last year. Nine of these workers (or more than half of cases) died after falling from roofs and ladders. The new initiatives are part of a three-pronged WAH Masterplan to tackle WAH issues through raising awareness, capability building and intervention efforts.
New initiatives targeting Roof works and Ladder Safety
3 One of these initiatives is the introduction of a new Guide on Working Safely on Roofs – a concise handbook highlighting safe practices and salient points related to roof works, such as fragile roof hazards. Contractors engaged in roof works will be required to implement measures that can allow workers to work safely on roofs and not be subjected to the risks of falls. Measures recommended in the guide include installing independent lifelines, and providing workers with safety harnesses and proper equipment (such as crawl boards) to work on roofs. The guide will be disseminated through the Safety Compliance Assistance Visits to reach out to worksites where roofworks are ongoing, to help contractors enhance their safety management. MOM and the WSH Council will also engage both roof and general contractors involved in roof works in targeted workshops over the next few months.
4 With the extensive use of ladders across many workplaces, it is critical to educate workers to use them properly. A new Ladder Safety engagement effort has been launched to foster the safe and correct use of ladders. MOM and the WSH Council will be partnering with trade associations and leading hardware stores to distribute a newly developed Ladder Safety Pack, targeting trades and industries with high ladder usage such as electrical workers. The Pack is made up of a ladder safety handbook and stickers to be distributed to relevant workers. The ladder safety handbook advises workers when they can use ladders for specific jobs and when they should consider other equipment, such as scissor lifts. The stickers serve as prominent displays with key tips on ladder safety, such as the dangers of falling while standing on the top rung of the ladder and the need to ensure that the ladder is positioned on stable ground before use. In addition, other outreach activities will be rolled out in the second half of 2012.
Strengthening WAH capabilities across all levels
5 More will also be done to strengthen WAH capabilities for both management and workers. In this aspect, MOM and WSH Council will develop WAH Courses for all levels, including workers, supervisors, assessors and managers. The courses will ensure that managers and supervisors know how to plan and supervise WAH activities. Workers must also be adequately trained to manage WAH risks and are competent enough to perform their tasks, such as roofs works, in a safe manner. These courses will be piloted in the second half of 2012 and are expected to be rolled out early next year.
Exploring legal requirements to regulate WAH practices
6 To bring about further improvements in the industry, MOM will explore the feasibility of enhancing the current WAH regulatory framework by introducing possible new legal requirements.
7 Elaborating on this, Mr Hawazi Daipi, Senior Parliamentary Secretary for Education and Manpower, said, “MOM is currently exploring the introduction of a dedicated set of Work at Heights regulations, as we review our existing rules and look to streamline them while addressing areas that could be potentially strengthened. This includes mandating Fall Prevention Plans for all workplaces and extending the Permit-to-work system, which already exists for Scaffold operations. MOM will be working closely with the WSH Council to engage industry stakeholders in the formulation of the Regulations for efficient and effective solutions, keeping in view industry practises and work environments. We plan to kick off public consultation on the Regulations in the second quarter of 2012.”
8 “Besides the longer term regulatory enhancements, MOM will continue to crack down on unsafe work at heights practices through stepped up inspections on targeted workplaces. While we raise awareness and give time to industry to improve their safety measures, we must urge workplaces to immediately put a stop to obvious and dangerous working conditions that can harm workers. Enforcement, engagement as well as capability building efforts will have to work hand-in-hand to reduce work at heights risks,” added Mr Suresh Navaratnam, MOM's Director of Policy, Information and Corporate Services from the Occupational Safety and Health Division.
9 Chairman of the National Work at Heights Taskforce Mr Wong Weng Sun said, “Falls from Heights is a matter of grave concern as workers can be killed or seriously injured. It can affect workers from all sectors, as we have seen from the 2011 cases. Hence, the Taskforce wants to re-energise and extend our efforts, going far beyond construction sites and shipyards. Industry must be made aware that poor management of work practices puts everything riding on the task – workers’ lives, productivity and reputation – at risk. Stakeholders must immediately take proactive actions and put preventative measures in place to prevent fatal falls at work.”
10 Relevant stakeholders who wish to find out more on the ProBE programme and the latest WAH initiatives can visit the WSH Council website at www.wshc.sg

WSH Guidelines Working safely on roofs

Working on roofs is a high-risk activity. From 2007 to 2011, fatal falls during work on roofs had claimed 20 lives. Fall from roofs have also caused serious workplace injuries, often resulting in permanent disabilities (e.g., paralysis). Hence this guide is developed to help contractors who are involved in roof works or required to perform work on roofs, better manage and prevent fall from heights while working on roofs.


This guide is relevant for new roof construction and work on roofs of existing buildings (e.g., inspection, repair, maintenance, cleaning work and demolition). It contains salient points on how to plan and work safely on roofs operations such as:
• key considerations in planning for work on roofs;
• fall hazards in various stages of work on roofs;
• control measures against falls;
• administrative controls; and
• personal protective equipment (PPE).

After reading this guide, the user should be able to:
• Identify the risks involved with working on roofs;
• Choose the right access equipment for use on the job;
• Understand and determine the appropriate measures for risk control; and
• Develop a plan to prevent falls during roof works.

Please view the guidelines from WSH Council here.

Sunday, March 18, 2012