Saturday, April 21, 2012

Don't go separate wastes

When his private waste collector provided only a single bin for recyclables, bank executive Lawrence Tan was willing to pay Colex Holdings for additional bins so that he could sort and place his recyclables in separate receptacles.
The public waste collector turned down his offer.
So Mr Tan, 48, and his neighbour bought themselves a second bin.
But they and other Singaporeans who separate their recyclables shouldn't bother. Recyclables are thrown into the same truck at the point of collection.
Going by what public waste collectors tell The New Paper, Singapore adopts a "co-mingle" approach.
"In the past, Singapore adopted the practice of sorting out recyclables at source, but now with more efficient sorting facilities, we are moving towards co-mingling," said Veolia Environmental Services marketing and communication manager Christina Lee.
Sembcorp , one of the big four public waste collectors, also confirmed that it practises co-mingling.
Even if the recyclables are segregated, public waste collectors re-sort them as they often find contaminants such as food waste or other unsuitable material like tissue paper thrown in.
Typically, 20 to 30 per cent of items set aside for recycling are found unsuitable, a Sembcorp spokesman said.

Other countries
"Singapore's attitude towards recycling is still Third World.
In Taiwan and Japan, the law requires recyclables to be separated," said an industry source.
Also public waste collectors supply recyclables directly to paper, glass and plastics manufacturers.
"Paper mill manufacturers prefer different grades of (separated) paper as secondary raw material because it can be turned into different types of finished product," said Ms Lee.
"For instance, recycled cartons are turned into newspaper and recycled newspaper into toilet paper.
"That's why we have to sort them, and that goes for plastics, too. There are seven types of plastics, and the public won't know how to sort them."
One of the benefits of co-mingling is lower collecting costs because single-compartment trucks are cheaper to buy and operate. Collection can be automated and routes serviced more efficiently, said Singapore Environment Council (SEC) executive director Jose Raymond.

Mr Tan had written to the The Straits Times Forum on Monday highlighting infrastructure challenges of recycling. "Currently, Colex provides flimsy blue plastic bags that households must use to bag all forms of recyclables. Not only is this meaningless as there seems to be no sorting dedicated recycling, it is also messy," he wrote.
Mr Tan felt that co-mingling did not make sense.
"You have people who are prepared to sort their recyclables, but the collectors will still go through the separate recyclables. Isn't that unproductive?" he asked.
"I suppose it's a question of education, isn't it? And we're supposed to be a world-class nation."
But asked whether Singapore should enact laws requiring people to separate their recyclables like in California and Japan, Mr Tan felt it would be extreme.
"I'm an optimist. I believe the future generation should be able to do things better ," he said.
The SEC pointed out that there is a downside to co-mingling. It increased "downcycling" of paper - using high-quality fibres for low-end purposes like making for cereal and snack boxes to avoid the presence of contaminants.
It would mean cutting down more trees for low-end uses, an environmental waste.
Indeed, an industry source told The New Paper that unlike in Europe, photocopy paper here is made from virgin pulp and it ends up as cartons - because the fibre is longer and stronger - or worse, turned into toilet paper.
The fibres get shorter and weaker each time paper is recycled.

This article was first published in The New Paper.

Thursday, April 19, 2012

New initiatives to address Falls from Heights fatalities

The Ministry of Manpower and the Workplace Safety and Health Council’s National Work at Heights (WAH) Taskforce have rolled out new initiatives to address falls from heights (FFH) fatalities. Efforts will be focused on four key areas of WAH - roof works, ladder use, structures, and scaffolds or mobile elevated work platforms (MEWPs). Industries performing such work will be actively engaged and educated on the safety of such work under the Programme-based Engagement (ProBE) Plus initiative this year.
2 Falls from Heights (FFH) remain the highest contributor of workplace fatalities, claiming the lives of 17 workers last year. Nine of these workers (or more than half of cases) died after falling from roofs and ladders. The new initiatives are part of a three-pronged WAH Masterplan to tackle WAH issues through raising awareness, capability building and intervention efforts.
New initiatives targeting Roof works and Ladder Safety
3 One of these initiatives is the introduction of a new Guide on Working Safely on Roofs – a concise handbook highlighting safe practices and salient points related to roof works, such as fragile roof hazards. Contractors engaged in roof works will be required to implement measures that can allow workers to work safely on roofs and not be subjected to the risks of falls. Measures recommended in the guide include installing independent lifelines, and providing workers with safety harnesses and proper equipment (such as crawl boards) to work on roofs. The guide will be disseminated through the Safety Compliance Assistance Visits to reach out to worksites where roofworks are ongoing, to help contractors enhance their safety management. MOM and the WSH Council will also engage both roof and general contractors involved in roof works in targeted workshops over the next few months.
4 With the extensive use of ladders across many workplaces, it is critical to educate workers to use them properly. A new Ladder Safety engagement effort has been launched to foster the safe and correct use of ladders. MOM and the WSH Council will be partnering with trade associations and leading hardware stores to distribute a newly developed Ladder Safety Pack, targeting trades and industries with high ladder usage such as electrical workers. The Pack is made up of a ladder safety handbook and stickers to be distributed to relevant workers. The ladder safety handbook advises workers when they can use ladders for specific jobs and when they should consider other equipment, such as scissor lifts. The stickers serve as prominent displays with key tips on ladder safety, such as the dangers of falling while standing on the top rung of the ladder and the need to ensure that the ladder is positioned on stable ground before use. In addition, other outreach activities will be rolled out in the second half of 2012.
Strengthening WAH capabilities across all levels
5 More will also be done to strengthen WAH capabilities for both management and workers. In this aspect, MOM and WSH Council will develop WAH Courses for all levels, including workers, supervisors, assessors and managers. The courses will ensure that managers and supervisors know how to plan and supervise WAH activities. Workers must also be adequately trained to manage WAH risks and are competent enough to perform their tasks, such as roofs works, in a safe manner. These courses will be piloted in the second half of 2012 and are expected to be rolled out early next year.
Exploring legal requirements to regulate WAH practices
6 To bring about further improvements in the industry, MOM will explore the feasibility of enhancing the current WAH regulatory framework by introducing possible new legal requirements.
7 Elaborating on this, Mr Hawazi Daipi, Senior Parliamentary Secretary for Education and Manpower, said, “MOM is currently exploring the introduction of a dedicated set of Work at Heights regulations, as we review our existing rules and look to streamline them while addressing areas that could be potentially strengthened. This includes mandating Fall Prevention Plans for all workplaces and extending the Permit-to-work system, which already exists for Scaffold operations. MOM will be working closely with the WSH Council to engage industry stakeholders in the formulation of the Regulations for efficient and effective solutions, keeping in view industry practises and work environments. We plan to kick off public consultation on the Regulations in the second quarter of 2012.”
8 “Besides the longer term regulatory enhancements, MOM will continue to crack down on unsafe work at heights practices through stepped up inspections on targeted workplaces. While we raise awareness and give time to industry to improve their safety measures, we must urge workplaces to immediately put a stop to obvious and dangerous working conditions that can harm workers. Enforcement, engagement as well as capability building efforts will have to work hand-in-hand to reduce work at heights risks,” added Mr Suresh Navaratnam, MOM's Director of Policy, Information and Corporate Services from the Occupational Safety and Health Division.
9 Chairman of the National Work at Heights Taskforce Mr Wong Weng Sun said, “Falls from Heights is a matter of grave concern as workers can be killed or seriously injured. It can affect workers from all sectors, as we have seen from the 2011 cases. Hence, the Taskforce wants to re-energise and extend our efforts, going far beyond construction sites and shipyards. Industry must be made aware that poor management of work practices puts everything riding on the task – workers’ lives, productivity and reputation – at risk. Stakeholders must immediately take proactive actions and put preventative measures in place to prevent fatal falls at work.”
10 Relevant stakeholders who wish to find out more on the ProBE programme and the latest WAH initiatives can visit the WSH Council website at www.wshc.sg

WSH Guidelines Working safely on roofs

Working on roofs is a high-risk activity. From 2007 to 2011, fatal falls during work on roofs had claimed 20 lives. Fall from roofs have also caused serious workplace injuries, often resulting in permanent disabilities (e.g., paralysis). Hence this guide is developed to help contractors who are involved in roof works or required to perform work on roofs, better manage and prevent fall from heights while working on roofs.


This guide is relevant for new roof construction and work on roofs of existing buildings (e.g., inspection, repair, maintenance, cleaning work and demolition). It contains salient points on how to plan and work safely on roofs operations such as:
• key considerations in planning for work on roofs;
• fall hazards in various stages of work on roofs;
• control measures against falls;
• administrative controls; and
• personal protective equipment (PPE).

After reading this guide, the user should be able to:
• Identify the risks involved with working on roofs;
• Choose the right access equipment for use on the job;
• Understand and determine the appropriate measures for risk control; and
• Develop a plan to prevent falls during roof works.

Please view the guidelines from WSH Council here.

Sunday, April 8, 2012

Fight at work site lands five in hospital


A work-related dispute involving foreign workers turned into a fight yesterday. Five men were arrested for rioting and five others were rushed to hospital with injuries. The fight broke out near a construction site at Senja Road in Bukit Panjang.

An estate agent who wanted to be known only as Mr Tan said he was in the neighbourhood when he heard a commotion. He said: "I saw that a fight had broken out. There were about 20 people in the vicinity, both onlookers and others who looked like construction workers. "Some of the men had pipes in their hands and they looked like they were about to hit others with them.

"The police arrived minutes later, so I decided to walk away."

The New Paper understands that the fight involved workers from Bangladesh and China. The situation could have been worse if not for the speedy response by the police, who received a call about the incident at about 8.30am. Officers arrived some 30 minutes later.

The Singapore Civil Defence Force (SCDF) also received a call at around the same time. Two ambulances rushed to the scene and SCDF said five men were sent to Khoo Teck Puat Hospital.

Not taking any chances
Even though the fight had ended, the police weren't taking any chances. More than two hours later, police officers were still at the scene. TNP was there at 10.30am and spotted a patrol car. Police officers were also seen questioning workers.

Just after 11am, a police van entered the construction site and a group of construction workers were led into it. The van left the premises about 10 minutes later.

Wednesday, March 21, 2012

WORKPLACE SAFETY & HEALTH CIRCULAR ON SAFE OPERATION OF PILING MACHINES

From MOM, Dated 14 Mar 2012
1.In Feb 2010, while operating a piling rig to drive a reinforced concrete pile into the ground, the rig’s upper structure (including the leader assembly) suddenly slewed 180deg. In the process, the pile was pulled out of the ground. The rig operator was subsequently found fatally pinned between the backstay support of the piling rig and the pile.
2. Investigation revealed that in the midst of the pile being driven into the ground, the rig operator left the operator’s cabin without engaging the rig’s swing brake. The piling rig started to slew on its own due to the slight inclination of the ground. Coupled with the momentum of the hammer strikes and/or the resultant vibrations, the driven pile began to tilt and eventually broke into three segments. It was most likely that when the rig operator realized that the pile was tilting and the rig was slewing, he tried to run back into the operator’s cabin to stop the piling operation. However, before he could make it into the cabin, he was caught between the pile and the backstay support of the rig.
3. The swing brake, when engaged, would have prevented the rig from slewing during piling operations. Piling contractors, whether as employers or as principals to sub-contractors undertaking the piling works, have a duty to ensure the safety of the workers performing the work. All piling contractors are advised to alert all piling rig operators, for example, through tool box meetings, assessment of the permit-to-work, and training, that they are not to leave their piling rig during operations.
4. Should you need further information, please contact the Ministry at MOM_OSHD@mom.gov.sg

Saturday, February 25, 2012

Environment council aims to double number of firms with 'eco certs'

Singapore Environment Council aims to boost green office practices     
Published in the Straits Times on Feb 25, 2012

By Carolyn Khew

The Singapore Environment Council (SEC) hopes to double the number of companies certified for environmentally friendly practices by the year end. To date, 110 firms have received the Eco-Office certification, with 30 getting the nod last year. The initiative was launched in June 2002 by the council and real estate developer City Developments.
Background story
Started in 2007, it hopes to create awareness and encourage companies here to conserve energy in conjunction with World Environment Day on June 5. Said Ms Wong Yee Thing, senior executive of regional environmental management group at Ricoh Asia Pacific: 'We want to target organisations because most energy is consumed in offices. By reaching out to organisations, we're also influencing more people to save energy.'
To mark its 10th anniversary, an event was held at City Square Mall - Singapore's first eco-friendly shopping centre - on Thursday, where Minister for the Environment and Water Resources Vivian Balakrishnan presented certificates to organisations that had received the Eco-Office label last year.